基於W80X的DS18B20的驅動

基於W80x實現DS18B20驅動。代碼如下；

#include "wm_include.h"
#include "temper.h"
 
 
#define DS18B20_SKIP_ROM        0xCC
#define DS18B20_CONVERT_T       0x44
#define DS18B20_READ_SCRATCHPAD    0xBE

static void t_Delay_us(uint16_t num) 
{
    uint32_t i;
    for(i=0;i<(80*num);i++)
    {
        __NOP();
    }
        
}

static uint8_t DS18B20_IN(void)
{
    tls_gpio_cfg(WM_IO_PB_00, WM_GPIO_DIR_INPUT, WM_GPIO_ATTR_FLOATING);
    return tls_bitband_read(HR_GPIOB_DATA,WM_IO_PB_00-16);                  //讀取引腳電平
}

static uint8_t DS18B20_LOW(void)
{
    // tls_gpio_cfg(WM_IO_PB_00, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
    tls_bitband_write(HR_GPIOB_DATA, WM_IO_PB_00-16, 0);
}

static uint8_t DS18B20_HIGH(void)
{
    // tls_gpio_cfg(WM_IO_PB_00, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
    tls_bitband_write(HR_GPIOB_DATA, WM_IO_PB_00-16, 1);
}

static void set_gpio(void)
{
    tls_gpio_cfg(WM_IO_PB_00, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
}



static uint8_t DS18B20_Init(void)
{
    uint8_t AckBit;
 
    DS18B20_LOW();
    t_Delay_us(480);
 
    DS18B20_HIGH();
    t_Delay_us(70);
 
    AckBit = DS18B20_IN();
    t_Delay_us(240);
    if(AckBit)
    {
        /*打印錯誤信息*/
        return 1;
    }
    
    set_gpio();
    return 0;
}
 
static void DS18B20_WriteBit(uint8_t bit)
{
    DS18B20_LOW();
    t_Delay_us(10);
    if(bit)
    {
        DS18B20_HIGH();
    }
    else
    {
        DS18B20_LOW();    /*可省略*/
    }
    t_Delay_us(45);
    DS18B20_HIGH();
    t_Delay_us(2);
}

 
static void DS18B20_WriteByte(uint8_t byte)
{
    uint8_t i;
    for(i = 0; i < 8; i++)
    {
        DS18B20_WriteBit(byte & (0x01 << i));
    }
}
 
uint8_t DS18B20_ReadBit(void)
{
    uint8_t bit;
 
    DS18B20_LOW();
    t_Delay_us(5);
 
    DS18B20_HIGH();
    t_Delay_us(10);
    
    if(DS18B20_IN())
    {
        bit = 1;
    }
    else
    {
        bit = 0;
    }
    t_Delay_us(45);
    set_gpio();
    return bit;
}
 
void DS18B20_ReadByte(uint8_t *byte)
{
    uint8_t i;
    for(i = 0; i < 8; i++)
    {
        *byte >>= 1; // 右移一位
        if(DS18B20_ReadBit())
        {
            *byte |= 0x80; // 設置最高位
        }
    }
}
 
void DS18B20_Tem_Convert(void)
{
    if(DS18B20_Init() == 0)
    {
        DS18B20_WriteByte(DS18B20_SKIP_ROM);
        DS18B20_WriteByte(DS18B20_CONVERT_T);
    }
    else
    {
        /*打印錯誤信息*/
        printf("%s DS18B20_Init ERROR\n",__FUNCTION__);
    }
}
 
void DS18B20_Read_Tem(float* tem)
{
    uint16_t temValue;
    uint8_t tem_LSB, tem_MSB;
    if(DS18B20_Init() == 0)
    {
        DS18B20_WriteByte(DS18B20_SKIP_ROM);
        DS18B20_WriteByte(DS18B20_READ_SCRATCHPAD);
 
        DS18B20_ReadByte(&tem_LSB);
        DS18B20_ReadByte(&tem_MSB);
 
        temValue = (tem_MSB << 8) | tem_LSB;
        
        *tem = (float)temValue / 16;
    }
    else
    {
        /*打印錯誤信息*/
        printf("%s DS18B20_Init ERROR\n",__FUNCTION__);
    }
}
 
 

#define TEMP_TASK_PRORITY   3

#define TEMP_TASK_STACK_SIZE    1024
static OS_STK TaskStk[TEMP_TASK_STACK_SIZE/4];

void user_temp_task(void)
{
    float temp=0;
    uint8_t time=10;
    uint8_t flag=0;
    uint8_t AckBit;
    printf("%s %d \n",__FUNCTION__,__LINE__);
    set_gpio();
    // tls_gpio_cfg(WM_IO_PA_04, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
    while (1)
    {
        // tls_os_time_delay(2000);
        DS18B20_Tem_Convert();
        tls_os_time_delay(1000);
        DS18B20_Read_Tem(&temp);
        printf("temp = %f \n",temp);
        
    }
    
}


void user_temp_task_create(void)
{
    tls_os_task_create(NULL, 
                      "temperatrue",
                       user_temp_task,
                       NULL,
                       (void *)TaskStk,          /* task's stack start address */
                       TEMP_TASK_STACK_SIZE, /* task's stack size, unit:byte */
                       TEMP_TASK_PRORITY,
                       0);

}